Sunbird -III Plastic Seal
|Type of Seal||-||SB-III|
|Weight in GMS||-||1.9-2.1|
|L x B x W in MM||-||24.20 x 14.00 x 7.40|
|Area of Logo (L x B mm)||-||φ 12.00|
"Sunbird-III" plastic seal (Patent No. 190641) has a unique locking mechanism where the female part is provided with an all round collar to protect the locking arrangement. Once the seal is locked, the insert is totally swallowed by the capsule leaving no room for any attempt to reach its locking mechanism to tamper this seal.
The insert of "Sunbird-III" plastic seal is so designed that it locks effectively by inserting it into the capsule from any of its side. Due to its dual-sided locking mechanism, the entry of the insert into the capsule is not restricted to one particular side alone.
"Sunbird-III" plastic seal is so designed that at the slightest attempt of tampering its mechanism to unlock the seal, the head of the insert will break and / or the capsule of the seal will vertically split on one or both sides thus damaging and rendering the seal unusable.
This seal can be used with 26 OR 28 S.W.G. plain galvanized wires. It can be used almost on any kind of packaging and applicability is not restricted to the length of the wire.